中文
Zang Tong and Associate Professor Wang Zongshen published an article entitled “Influence of pulse energy on surface integrity of AZ31 magnesium alloy processed by femtosecond laser shock peening” in Journal of Materials Research and Technology.
In this work, the influence of femtosecond laser pulse energy on the surface integrity of AZ31 magnesium alloy is investigated in detail. The results show that regular dents are produced at the material surface with relatively low pulse energies, and the regular dent morphology disappears gradually with increasing pulse energy, suggesting an increased surface roughness. Surface microhardness and residual compressive stress are increased significantly after FLSP. The surface microhardness increases from the untreated 58.13 HV to the maximum value of about 69.58 HV at 37 μJ, by an increase of 19.7%. At 73 μJ, the residual compressive stress rises to a maximum value of approximately 59.6 MPa from an untreated 16.3 MPa. Moreover, the nano-hardness near the surface at the cross section is 1.68 GPa at 37 μJ, with an increase of 46% compared to the untreated 1.14 GPa. Particularly, twins and grain refinement layers are observed near the surface after FLSP. The plastic deformation and grain refinement with low pulse energies contribute to the surface strengthening while the thermal effect and surface oxidation with increasing pulse energy may inhibit the enhancement of surface integrity.
